WATER PUMP MODULE

TINKS025

  1. It is a motor connected to the pump which is submerged in the fluid which we want to be pumped.
  2. It can be operated from a 2.5 ~ 6V power supply.
  3. It can take up to 120 litres per hour with very low current consumption of 220mA.
Features:-
  1. Voltage: 2.5-6V
  2. Maximum lift: 40-110cm / 15.75 "-43.4"
  3. Flow rate: 80-120L / H
  4. Low cost, small size Submersible
  5. Driving Mode: DC, Magnetic Driving
  6. Material: Engineering Plastic.
Applications:-
  1. Drainage
  2. Sewage pumping, sewage treatment plant.
  3. Used In water well.

    

int mr1 = 8;

int mr2 = 9;

 

void setup() {

// put your setup code here, to run once:

pinMode(mr1,OUTPUT);

pinMode(mr2,OUTPUT);

Serial.begin(9600);// default communication rate of arduino

}

void loop() {

// put your main code here, to run repeatedly:

 

digitalWrite(mr1,HIGH);

digitalWrite(mr2,LOW);

}